I would like to remove some bumper stickers from my car's windows. What is the easiest and most efficient way to do it?|||On a warm day try peeling it off. With the crud that is left use WD40 and a single edge razor blade to remove the rest of the gunk.
I done this a bunch of times and it works nicely. Hopefully you don't have any on tinted windows. Doesn't matter if the tint is from the factory or not. I ran into the problem after removing the sticker the tinting was a different color and you could still make out the design if you looked hard enough. So my truck had a Calvin image going to the bathroom on a Dodge ram head faded into the tint. After a few years you can't see it anymore.
Good luck with the stickers and don't cut yourself.|||Go to the parts store and get a single edged razor blade scraper.|||Use a heat gun or a hair dryer, and peel them off.|||Have a bucket of water handy in case you spill something on the paint.. Make sure the paint is cool. Wet the paint beneath the sticker with dish washing liquid before you begin. spray the sticker with WD-40. Let it soak through to the adhesive, then spray again. Once you begin peeling at a corner of the sticker, spray the back side, wait a few minutes, then peel the rest off. Dissolve the remaining adhesice with WD-40, then wash with dish washing liquid( Dawn preferred), and rinse. After that, observe parking regulations.|||A single edge razor blade|||i used nail polish remover (with acetone) and a scraper. it worked well, and fairly easily.|||Finger nail polish remover. I use to use it to remove price stickers from shelves in the department store I worked in. You just let it soak in a minute and most of the time you don't even have to scrape. Just make sure you don't get any on your paint on the car.|||Use acetone and a razor blade|||A straight edge razor blade.|||Razor blade and orange oil based cleaner if it leaves sticks stuff.|||single edged razor blade and scrape them off like you would ice. You can get at paint store. Ask. Won't scratch glass. cause steel and glass are same hardness|||Single edge razor blade... Wipe any residual adhesive with a soft rag and some nail polish remover.
Tuesday, December 6, 2011
What's something good I can put on a bumper sticker reffering to interracial dating?
Hello! I'm a mixed girl who LOVES dating white men and I want to create a little bumper sticker to put on my car that has something to do with interracial love or interracial dating, but I can't really think of anything creative or something that would stand out. Please no negative comments! I want it to be something cute and tasteful, thanks!|||Love is colorblind.
Races and cultures have not limit on love
Love knows no color
you can combine any of those with a picture or do white text with a black background or visa versa
I'm mixed too and I know race ddoesn't matter.|||Love is Colour Blind!!
Races and cultures have not limit on love
Love knows no color
you can combine any of those with a picture or do white text with a black background or visa versa
I'm mixed too and I know race ddoesn't matter.|||Love is Colour Blind!!
How do you get rid of yellow paint on a bumper of a grey car?
I backed into a yellow parking bar at a park, and it got the bumper on the left side. I want to try something before I go to a body shop.|||Try some Methyl-Ethyl Keytone. You can buy at your local hardware or paint store.|||you can try sanding it with a fine sand paper,prime it then spray it with a colour match.|||use some polishing compound. you can buy it at an auto parts store. The directions for use are similar to wax. If you have lots of thick yellow paint, you might try scraping some off first.|||Polishing compound and a wet sponge. Then wax.
What is the cheapest way to fix a rusted chrome bumper?
I have a 97 Nissan Pathfinder LE and have rust and/or peeling on the chrome bumper. I don't care if I have to paint it if I can, I just want the cheapest solution and would like to do it myself. What is the cheapest way to fix it?
Thank You!|||There is no cheap way to rechrome a bumper. You can send it in to be rechromed, or to remove light surface rust, use a brillo or steel wool pad with soapy water. Follow this with a chrome polish, and see if it helps.|||get a new one|||hey i would take it to all these different places where they fix this stuff and find the cheepest one!! if you have msn add m_e_baron_09@hotmail.com|||I used a potato to take rust off my cast iron skillet. You could try it on chrome. Just take a potato and cut it in half. Rub the bumper with the potato. It might work on chrome.|||if you choose to paint it than all you need to do is wet sand... use a fine sand paper with running water and go slow, all you want to do is smooth the peeling and rough it enough to hold paint. dont forget to primer first.
if you dont want to paint do the same process but use super fine sandpaper with a spray can of wd-40 keep it lubed as you sand it do this until peel marks or scratch deminash's a little then switch to a buffer and buff until shiney again. this may take some time but is will work.|||If you remove the bumper and wire wheel the rusted area, you can paint over it with a product called liquid chrome. It gives you th same shine as the origanal chrome.|||I would say the cheapest way would be to sand smooth prim and paint it .|||Just Remove the Bumper.
Thank You!|||There is no cheap way to rechrome a bumper. You can send it in to be rechromed, or to remove light surface rust, use a brillo or steel wool pad with soapy water. Follow this with a chrome polish, and see if it helps.|||get a new one|||hey i would take it to all these different places where they fix this stuff and find the cheepest one!! if you have msn add m_e_baron_09@hotmail.com|||I used a potato to take rust off my cast iron skillet. You could try it on chrome. Just take a potato and cut it in half. Rub the bumper with the potato. It might work on chrome.|||if you choose to paint it than all you need to do is wet sand... use a fine sand paper with running water and go slow, all you want to do is smooth the peeling and rough it enough to hold paint. dont forget to primer first.
if you dont want to paint do the same process but use super fine sandpaper with a spray can of wd-40 keep it lubed as you sand it do this until peel marks or scratch deminash's a little then switch to a buffer and buff until shiney again. this may take some time but is will work.|||If you remove the bumper and wire wheel the rusted area, you can paint over it with a product called liquid chrome. It gives you th same shine as the origanal chrome.|||I would say the cheapest way would be to sand smooth prim and paint it .|||Just Remove the Bumper.
How much will it cost to fit a new rear bumper to a Ford Ka?
Including labour charges to have it fitted by a mechanic and the actual cost of a new rear bumper?|||The bumper skin of a Ka is in three parts - you may not need all three parts.
Bear in mind that the actual bumper beam (the impact-absorbing part) on a modern car is hidden behind the skin, and may also have been damaged and require replacement.|||about 120.00 for th bumper and 2 hour labor charge
most shops are 100 an hour where i live so u could spend
320.00|||a couple of hours labour to fit ,cost of new fixing clips (couple of pounds) but you don't say if painted or grey plastic if painted that would be extra labour and paint and materials .need more details to give a full costing|||you can find the part in a junk yard for about 30-50 and to have it installed by a mec, that will be about 50-60 for a used but looking new bumper|||The price will very from shop to shop, You need to find a new or used bumper and then fin a mechanic to put in on at a good price, hope this helps|||Sorry i personally think it's cheaper to buy new one
Bear in mind that the actual bumper beam (the impact-absorbing part) on a modern car is hidden behind the skin, and may also have been damaged and require replacement.|||about 120.00 for th bumper and 2 hour labor charge
most shops are 100 an hour where i live so u could spend
320.00|||a couple of hours labour to fit ,cost of new fixing clips (couple of pounds) but you don't say if painted or grey plastic if painted that would be extra labour and paint and materials .need more details to give a full costing|||you can find the part in a junk yard for about 30-50 and to have it installed by a mec, that will be about 50-60 for a used but looking new bumper|||The price will very from shop to shop, You need to find a new or used bumper and then fin a mechanic to put in on at a good price, hope this helps|||Sorry i personally think it's cheaper to buy new one
Where to find the plastic strip on top of Jeep Cherokee rear bumper?
I have a 1997 Grand Cherokee and have been rear ended recently. I replaced the rear bumper, but the replacement bumper did not come with the plastic strip on top of the bumper, and my old one has been damaged. Does anyone know what that part is called (it's a kind of plastic bar with gouges that sits on top of the bumper just below the tailgate). And also where I could buy it? Thanks a lot!|||It's called a "rear bumper step pad". I would have to say that you're gonna have to go to your local auto body shop because I looked for the part online and I could only find them for 99-01 models. Your local auto body shop though should either have them or find them with ease.
How do I safely remove the goo from a removed bumper sticker left on a real nice paint job?
My sweet new ride came with a lousy bumper sticker on it. I peeled it off, but goo remains. I need to remove it without any serious scrubbing or damage to the paint. The chemicals would have to be very mild. Maybe you guys can help. Otherwise I guess I call Grandma : )|||I work in the auto body shop for 15 years. Using wax is the best way.|||Try putting some peanut butter on it,the oil from the peanut butter might break the goo down so it will just roll off.Just a thought,I don't know why, it just popped in my head when I read your question, and it want hurt the paint on your car.
I thought of goo gone too but I thought you might want to try something without chemicals.|||GOO GONE comes in a little can, is a liquid and will gently remove the goo that remains - also good for many other applications. The GOO GONE and a soft cotton rag ( old shirt ) will do the job.|||GOO GONE!!!
That will definitely take that goo off. Trust Me. I've used that thing on every surface, it doesn't damage it and takes the goo right off.
You could get it at target or walgreens
http://www.googone.com/|||Try WD 40. I have had good results with it in the past....you can also try finger nail polish remover. Good luck hope this helps solve your problem.|||try using ice to harden the goo, after it hardens you can easily peel if off with a soft cloth.|||Easy Off oven cleaner. Then wash and wax. It may sound stupid but it works. Bodyshops have been using it for years.|||you can get some heavy duty cleaner and a plastic scraper. Worked for me.|||goo gone. Listen to the majority.It is safe on all surfaces. I used it on brand new $5000 lightbars to get tar off . no harm|||WD40 works great and doen't damage the paint.|||Tea Tree Oil is great also.... and it is cheap- get it from pharmacies or places that sell essential oils
I thought of goo gone too but I thought you might want to try something without chemicals.|||GOO GONE comes in a little can, is a liquid and will gently remove the goo that remains - also good for many other applications. The GOO GONE and a soft cotton rag ( old shirt ) will do the job.|||GOO GONE!!!
That will definitely take that goo off. Trust Me. I've used that thing on every surface, it doesn't damage it and takes the goo right off.
You could get it at target or walgreens
http://www.googone.com/|||Try WD 40. I have had good results with it in the past....you can also try finger nail polish remover. Good luck hope this helps solve your problem.|||try using ice to harden the goo, after it hardens you can easily peel if off with a soft cloth.|||Easy Off oven cleaner. Then wash and wax. It may sound stupid but it works. Bodyshops have been using it for years.|||you can get some heavy duty cleaner and a plastic scraper. Worked for me.|||goo gone. Listen to the majority.It is safe on all surfaces. I used it on brand new $5000 lightbars to get tar off . no harm|||WD40 works great and doen't damage the paint.|||Tea Tree Oil is great also.... and it is cheap- get it from pharmacies or places that sell essential oils
What does the blue flag with a white wavy line bumper sticker represent?
I've seen more than several cars with a small flag bumper sticker as described above. I'm curious as to what it represents. It is blue with a wavy white horizontal line.|||The only thing I could find was this. I hope this is what you are talking about.
http://en.wikipedia.org/wiki/Blue_Flag_b鈥?/a>
http://en.wikipedia.org/wiki/Blue_Flag_b鈥?/a>
What does a "bumper to bumper" warranty mean for an extended warranty? Is it different from factory warranty?
I am buying a used car that has7K miles left on the factory warranty. Should I buy an extended warranty till 75K for "bumper to bumper"?|||Bumper to Bumper on an extended warranty usually covers you for major MECHANICAL malfunctions. They do not usually cover light bulbs or trim pieces. Lots of times they are a pain to deal with and most of the time will leave you feeling frustrated when they denie a claim. Some places with not accept certain "after-market" warranty companys|||Bumper to bumper means that every and any thing that goes wrong with your car they will fix. Factory warranty might just include the electric parts of your car (which are important also) What you need to do is go with someone that knows about cars to help you decide if you really need bumper to bumper or not. I just bought a used car and I got the warranty that covers all electrical plus motor. Sometimes they try to sell you more than you need.|||It depends.|||That anything between the bumper and bumper that cost more than $32.61 cents is NOT covered.|||I never by automotive extended warranty as they never pay. I know. I used to sell them.|||it's bumper to bumper till 75k on the clock. nothing changes
How much is would it cost to get a back bumper repaired or replaced?
I just need an estimate on how much you think it would cost to get a back bumper repaired (By that I mean repainted because I backed into someone and some of the paint is flaking off), or replaced. By the way this is on a 2003 silver Sunfire.|||a few hundred bucks, don't forget to take care of the other car to.
it happens.
it happens.
How much does it cost to fix paint on front bumper?
I have a black 03 Honda Civic EX and I accidently parked to far at a parking lot and hit a stone thing. It made a scratch going down on the front of my bumper on the right side.
How much would it cost to fix it?|||My husband is an auto-body painter so I know a little about this, but not too much! It depends on how they fix it. The best thing you can do is either see if you can get a shop to touch it up so that they just use touch-up paint in that one spot. It won't look as perfect as repainting it, but if they are good you won't notice it. Another thing that some body shops do is if you have a small job like this, you can make a deal with them that if you pay them in cash and don't use insurance, they can fix it for you and they will give the painter half the money and take the other half as profit. Ask around, don't take the first shop to throw a deal at you.|||Just do it yourself with some touch up paint, its only a bumper, why pay someone to do it. Get the correct paint at the auto store or dealer if you have to.
How much would it cost to fix it?|||My husband is an auto-body painter so I know a little about this, but not too much! It depends on how they fix it. The best thing you can do is either see if you can get a shop to touch it up so that they just use touch-up paint in that one spot. It won't look as perfect as repainting it, but if they are good you won't notice it. Another thing that some body shops do is if you have a small job like this, you can make a deal with them that if you pay them in cash and don't use insurance, they can fix it for you and they will give the painter half the money and take the other half as profit. Ask around, don't take the first shop to throw a deal at you.|||Just do it yourself with some touch up paint, its only a bumper, why pay someone to do it. Get the correct paint at the auto store or dealer if you have to.
How do i mount a winch to a stock jeep bumper?
I have a 2004 jeep wrangler and I did not want spend money on getting a bumper for my winch if I didn't need it. I know that you can buy a mounting plate that fits onto the stock bumper, however it seems like it would need to go where the sway bar is now. So what do i do to mount it to the stock bumper?|||You cant and dont, your stock bumper is not reinforced enough to properly handle the forces a wench will make when pulling your jeep, It could all easly tear off. Have a little patience and save up for a good bumber, Also see if you can get lucking in bidding and check out e-bay there are some real good winch bumbers for your jeep. and if you or a freind knows how to weld call these guys and see what they have, you DIY, they have a kit for you. www.ironscorpion.com|||Those guys are wrong. I have a 97 wrangler with a stock bumper and a Warn 9500ti winch. Warn offers an adapter plate made of heavy duty 1/4" steel plate that bolts to the front frame rails with good grade 8 bolts. Here is the link. http://www.warn.com/truck/mounting-systems/winch_mounts.shtml Hope this helps.|||www.4wheelparts.com for many choices for a bumper...If you can find a fabricator they can build you one also...Here in northern calif they are plentiful so you can almost go with the low bid for the job...
How do I touchup paint my scratched bumper?
I own a 2001 Acura Cl and was recently rear ended. The paint on the bumper was chipped off pretty badly, down to the metal surface. What is the best and least expensive way to get my bumper looking new again without having to replace it? I greatly appreciate any feedback. Thanks.|||Gosh, I just dealt with this on the front bumper of my TL...
I accidentally lowered the garage door onto the bumber...put small scatches on it.
Good news, it can be repaired to look almost as good as new....and I'm not an expert at paint, either...there's hope! :) Here's what I did:
Bought touch-up paint pens from the online source (See below). You'll need the color code for your car. Buy both the base color pen, and a clear-coat paint pen.
I used a Q-Tip...pulled off most of the cotton swab first, leaving just a little on the stick.
Clean/dry the bumper %26amp; do the touch-up in a well-lit area %26amp; when the humidity is low.
While sitting on a low slung chair in front of the bumper's damaged area, apply some of the base color to the Q-Tip with very few strokes within the damaged area. Use a small, clean piece of fabric to immediately wipe clean any over-painting that might occur.
Don't try to layer the paint to the bumper's original thickness, this will result in a poor appearance...the goal is to simply smoothly coat the raw areas of the bumper with paint.
Following the product's instructions, allow adequate time to dry, and then apply the clear-coat.
BTW, the procedure I followed works best for small scratches. Large gouges %26amp; big patches will require direct application from the paint pen, or the use of a touch-up paint bottle. Also, there's a point where buying a new bumper cover %26amp; having the pros' do the job makes the most sense. I'm guessing you'll be looking at ~ $400 - $600 for a new, painted bumper cover as installed from a body shop. (BTW, I also guessed this price b/4 reading the above post...based upon a similar repair job I had done a while back).
Best of success!|||First you need to sand with 600 grit sand paper then use primer then sand 600 grit again then a spot putty let dry and sand again with 1200 grit then paint let dry and sand again then simonize it.that's it unless the chip is deeper than i thought or just bring it to a shop and ask them how much to touch it up...Its really not that much.|||I own a Honda and a very similar incident happened to me. I went to a Honda dealer and ordered a small touch up paint bottle, this will come with precise instructions and if you follow them you will get a perfect match. Do not buy an aftermarket product because they are never the exact same. The dealer takes the year of the vehicle into consideration and dilutes the color to match the affect of the sun on your paint. FYI shake the paint bottle very well!!!|||My sister swears by nail-polish, but only if it's a little place not like the whole bumper, lol!|||use a sharpie|||If there arnt any dints, there are many products available, but from experience i used this stuff i got of the net, the site is www.paintscratch.com and it sells original factory touch up paint for pretty much any car model and make.
if you dont like buying stuff off the net, just go to you local auto shop as previously suggested.
good-luck :)|||If you were rear-ended the repair would be completely covered by the other parties insurance company. If the bumper refinish is down to the plastic (it's not metal) you will need to get it repaired and refinished. Typically $400 - $600 and on this vehicle I would get it done right. Touch up is only effective (looks "ok") on very small scratches. You will still see the damage but it wont stick out like a sore thumb. You can buy your color code from the dealer. Make sure you shake it well, wipe off excess from the applicator apply moderately. If it runs, wipe it off and start over. DO NOT store the touch up paint in your vehicle. It can explode in high temperatures.|||cheapest? contact the dealer to purchase a small tube of touch up paint. You can get the exact color of your car thru them. Sometimes the auto store only has generic colors, not the best match. They are about the size of a fat pen and under $10.|||bring it to a palce where it can get fixed.|||If the paint is chipped to the metal there is no quick fix that will look like nothing ever happened. Nothing you can buy in the store at a parts store will work. You will have to bond or prime the bumper and get it painted. Sorry.|||Buy the little bottles of paint from an auto shop. They are commonly found and come in various colors.
I accidentally lowered the garage door onto the bumber...put small scatches on it.
Good news, it can be repaired to look almost as good as new....and I'm not an expert at paint, either...there's hope! :) Here's what I did:
Bought touch-up paint pens from the online source (See below). You'll need the color code for your car. Buy both the base color pen, and a clear-coat paint pen.
I used a Q-Tip...pulled off most of the cotton swab first, leaving just a little on the stick.
Clean/dry the bumper %26amp; do the touch-up in a well-lit area %26amp; when the humidity is low.
While sitting on a low slung chair in front of the bumper's damaged area, apply some of the base color to the Q-Tip with very few strokes within the damaged area. Use a small, clean piece of fabric to immediately wipe clean any over-painting that might occur.
Don't try to layer the paint to the bumper's original thickness, this will result in a poor appearance...the goal is to simply smoothly coat the raw areas of the bumper with paint.
Following the product's instructions, allow adequate time to dry, and then apply the clear-coat.
BTW, the procedure I followed works best for small scratches. Large gouges %26amp; big patches will require direct application from the paint pen, or the use of a touch-up paint bottle. Also, there's a point where buying a new bumper cover %26amp; having the pros' do the job makes the most sense. I'm guessing you'll be looking at ~ $400 - $600 for a new, painted bumper cover as installed from a body shop. (BTW, I also guessed this price b/4 reading the above post...based upon a similar repair job I had done a while back).
Best of success!|||First you need to sand with 600 grit sand paper then use primer then sand 600 grit again then a spot putty let dry and sand again with 1200 grit then paint let dry and sand again then simonize it.that's it unless the chip is deeper than i thought or just bring it to a shop and ask them how much to touch it up...Its really not that much.|||I own a Honda and a very similar incident happened to me. I went to a Honda dealer and ordered a small touch up paint bottle, this will come with precise instructions and if you follow them you will get a perfect match. Do not buy an aftermarket product because they are never the exact same. The dealer takes the year of the vehicle into consideration and dilutes the color to match the affect of the sun on your paint. FYI shake the paint bottle very well!!!|||My sister swears by nail-polish, but only if it's a little place not like the whole bumper, lol!|||use a sharpie|||If there arnt any dints, there are many products available, but from experience i used this stuff i got of the net, the site is www.paintscratch.com and it sells original factory touch up paint for pretty much any car model and make.
if you dont like buying stuff off the net, just go to you local auto shop as previously suggested.
good-luck :)|||If you were rear-ended the repair would be completely covered by the other parties insurance company. If the bumper refinish is down to the plastic (it's not metal) you will need to get it repaired and refinished. Typically $400 - $600 and on this vehicle I would get it done right. Touch up is only effective (looks "ok") on very small scratches. You will still see the damage but it wont stick out like a sore thumb. You can buy your color code from the dealer. Make sure you shake it well, wipe off excess from the applicator apply moderately. If it runs, wipe it off and start over. DO NOT store the touch up paint in your vehicle. It can explode in high temperatures.|||cheapest? contact the dealer to purchase a small tube of touch up paint. You can get the exact color of your car thru them. Sometimes the auto store only has generic colors, not the best match. They are about the size of a fat pen and under $10.|||bring it to a palce where it can get fixed.|||If the paint is chipped to the metal there is no quick fix that will look like nothing ever happened. Nothing you can buy in the store at a parts store will work. You will have to bond or prime the bumper and get it painted. Sorry.|||Buy the little bottles of paint from an auto shop. They are commonly found and come in various colors.
How difficult is it to replace 08 Impala front bumper?
Got into a small accident and my front bumper is damaged. Want to know how difficult is it to take the bumper off and put it on myself. Saving me some money in my pocket. Asking can it be done with a ratchet or do I need other kind of tools? Front bumper on a 08 Chevy Impala LS.|||The whole story, my friend, is in Chiltons Auto Repair manual at the library. Just a quick look will tell you all you need to know to decide whether you can do it or if you should go to a shop.
How to repair minor bumper cover problem?
I when I park my car the other day, I back up and did not see the light concrete post was that close. The corner of the rear bumper was hit and now was bumped. I tried to use the rubber mullet to pop back the plastic cover but it seemed it was too hard to bump it back out.
Any other method I can try before bringing it to the dealer or body shop to fix it?|||toilet plunger or a suction cup and try to pull it out. my son just did that to his lexus though and he has to take it in his was on the corner and wouldn't come out.|||if you are very handy then you can use a heat gun on the inside of the bumper to gently soften the plastic then use a shoe horn to press the dents out gentle. if you do attempt this donnot rush it and donnot heat too much
be carefull|||Remove the cover and try to push it out from the back side.
Any other method I can try before bringing it to the dealer or body shop to fix it?|||toilet plunger or a suction cup and try to pull it out. my son just did that to his lexus though and he has to take it in his was on the corner and wouldn't come out.|||if you are very handy then you can use a heat gun on the inside of the bumper to gently soften the plastic then use a shoe horn to press the dents out gentle. if you do attempt this donnot rush it and donnot heat too much
be carefull|||Remove the cover and try to push it out from the back side.
What are some awesome bumper sticker ideas?
I want to create a Bumper sticker. Not that it matters. The car is a bug. So if you want to use that then it is cool. I want some ideas that are funny, Not inappropriate. I will have kids in the car. Me and my fiance drive my siblings places. They are young. Also anything for gay rights is cool to. As long as it does not make people mad.|||Bugs Are For Hugs..........
Love Me... Love my Bug|||I'm Here I'm Queer Kiss My Reer
Love Me... Love my Bug|||I'm Here I'm Queer Kiss My Reer
How much would it cost for a new front bumper on a 94 Ford explorer?
When i was still with my ex, he accidently backed his truck up to my car and bent my bumper and even though we are no longer together, he is still agreeing to fix my bumper but I would just prefer the money so I would like to know how much to ask for. I dont want him to pay for a brand new bumper but i also dont want the cheapest thing out there.|||the best way to find out is just shop around..you can easily go to an auto store like pep boys and ask them to look at it..%26amp; its free so theres nothing to lose..and give you an estimate for the part..otherwise, theres always junk yards..you can always find a bargain there %26amp; the parts are usually always in good shape..i hope this kind of helps you out|||more than the cars worth.|||about 20 - 40 bucks if ur lucky|||I found one on ebay for about 90 dollars it's black and pretty simple i'll give you the url and I found another that is about 130 bucks but it is chrome and about twice as nice I think you should go with the chrome one b/c it's twice as nice but less than twice as much but thats just my opinion.
How can I remove 94 blazer front bumper with stripped bolts?
I am replacing a front bumper on a 94 blazer but the square cutouts in the bumper are not holding the bolts in place because the bolts are stripped. Is there some way i can hold the end of the bolts in place? What should I do?|||Cut the heads off with a carbide wheel.|||If you go to Sears they sell a "Nut Buster or "Nut splitter". Use that to split the nuts so that they come off easily. You'll have to buy new bolts and nuts but sounds like you already need new ones anyway. I've owned nut busters since the early 60's and have found them invaluable on bumper replacements.
How do I make bumper stickers public on myspace?
I have myspace 2.0 and when I go to 'customize profile' and select the apps that I want, the bumper sticker app is not there to edit/make public or private... anyone care to help??? Thanks!|||go here and change the settings so it appears on your profile
http://profileedit.myspace.com/index.cfm…|||I would ask tom or customer support about that...
http://profileedit.myspace.com/index.cfm…|||I would ask tom or customer support about that...
How do you put on a rear bumper on a 1997 Honda Civic?
What tools do you need? Would you recommend a mechanic(*How much can you expect for a mechanic to charge for this?) to do it or is it something easy to do and you can do yourself. BTW, im talking about the rear Honda civic bumper cover. Sorry alot of questions but my bumper got messed up and I want to fix it asap. Thanks!|||the bumper is very easy to replace all you will need is a 10mm and a 12mm socket and wrench open you trunk and pull back the carpet on both sides on the back side of the trunk you will see the bolts.. after that look under the rear of your car and you will see 5 or 6 plastic screws i thing for that you will need a flat head screw driver but the always stick so you should have a pair of vise grips to hold the topside of them that's about all
Subscribe to:
Posts (Atom)